No.
Part name
‚
Overload relay
-6
ƒ
Lower unit
The method of replacing parts of lower unit is the same as upper unit.
*
Procedure
‚
1) Perform the process
2) Remove the terminal cover of compressor.
3) Remove OL holder and pull overload relay up.
4) Disconnect the lead wire from the overload relay
terminal.
•
1) Perform the process
2) Remove the base plate (Right). (3 screws)
3) Remove the drain guide. (2 screws)
4) Remove the base plate (Left). (2 screws)
-1 above.
‚
,
above.
– 63 –
Remarks
Terminal
cover
OL holder
Parts position
Fan
motor
Compressor
(For unit C)
x 2 Screws
× 3 Screws
Compressor
(For unit D)