Toshiba RAS-M18SAH-E Service Manual page 61

No. Part name
‚
Back cabinet
-1
Side cabinet
‚
P.C. board
-2
assembly
(For outdoor unit)
‚
Capacitor for
-3
compressor
‚
Capacitor for fan
-4
motor
‚
Transformer for
-5
outdoor unit
Procedure
1) Remove the back cabinet and side cabinet.
(6 screws)
1) Remove the connector. (16 portions)
2) Remove the P .C. board supports (4 portions), and
take out the P.C. board assembly.
1) Remove the capacitor band. (Each 1 screw)
2) Disconnect the lead wire from the capacitor terminal.
1) Remove the electrical parts cover. (1 screw)
2) Remove the capacitor band. (2 screws)
3) Disconnect the lead wire from the capacitor termi-
nal.
1) Remove the electrical parts cover. (1 screw)
2) Remove the transformer. (2 screws)
3) Disconnect the connector from the P.C. board
assembly.
– 62 –
Remarks
× 6 Screws
Connector
P.C.board
support