Toshiba RAS-M18SAH-E Service Manual page 57

No. Part name
‚
Back cabinet
-1
Side cabinet
‚
Capacitor for
-2
compressor
‚
Capacitor for fan
-3
motor
‚
Overload relay
-4
‚
Thermostat
-5
bimetal
Procedure
1) Remove the back cabinet and side cabinet.
(7 screws)
•
1) Perform the process
2) Remove the fixing screw securing the capacitor
band.
(1- ST2T ø4 x 8 )
3) Remove the cable connected to the terminal.
•
1) Perform the process
2) Remove the fixing screw.
(1- ST2T ø4 x 8 )
3) Remove the cable connected to the terminal.
•
1) Perform the process
2) Remove Fastons of leads.
3) Remove the fixing screw.
(1- ST2T ø4 x 10 )
4) Pull OL holder up and remove Overload relay from
OL holder.
•
1) Perform the process
2) Remove terminal cover of compressor.
3) Remove thermo holder and pull thermostat bimetal
up.
4) Remove Fastons of leads.
above.
above.
above.
above.
– 58 –
Remarks
× 7 Screws
1-ST2T 1-ST2T
φ4 x 8 φ4 x 8
1-ST2T
φ4 x 10
OL holder