Advertisement
5) The meter
designed to read the display unit of " micro
Tesla " directly. However if intend to know the
measurement reading value by " mili-Gauss ", then just
multiply the factor by " 10 "
For example :
If display reading is 11.43 micro Tesla. Then the reading
*
value for " mili- Gauss " will be 114.3 (11.4 x 10).
If display reading is 118.2 micro Tesla. Then the reading
*
value for " mili- Gauss " will be 1182 (118.2 x 10).
7. RECOMMENDATION
It is recommended to measure the presence of the
electromagnetic field inside and outside of your home
and business locations regularly.
As "hot spots" are detected by the EMF tester,
re-arrangement of the living and working areas is
lightly recommended. Always try the best to avoid long
term exposure to strong electromagnetic field.
8. BATTERY REPLACEMENT
1) When the left corner of the LCD display shows "LO
BAT", it indicates the battery output less than 6.5 V -
7.5 V.
Replacement of the battery is then needed. However
measurement could still be taken for another few hours
before the tester becomes inaccurate.
2) Open the Battery Cover (5-4, Fig 1) at the back of
tester and remove the battery.
3) Replace with a 9V battery and reinstate the cover.
5
9608-EMF-823
Advertisement
