The Blades Overlaps - Mandik SEDM Installation Instructions Manual
Multi compartment smoke extraction damper
Hide thumbs
Also See for SEDM:
- Maintenance and service manual (79 pages) ,
- Technical documentation manual (60 pages) ,
- Manual (59 pages)
Table of Contents
Advertisement
Installation in horizontal smoke
exhaust duct
6. Damper assembly procedures must be done so as all load transfer from the fire separating
constructions to the damper body is absolutely excluded. Back-to-back air - conditioning piping
must be hung or supported so as all load transfer from the back-to-back piping to the damper is
absolutely excluded.
7. Flanges
Flanges for SEDM
Installation in smoke exhaust ducts
Installation in vertical smoke exhaust duct
8
NOTICE
Flanges for square fire dampers are 30 mm
wide with oval hole.
Advertisement
Table of Contents
