Table of Contents
Advertisement
43755_user_guide
Export Compliance Information
This product is controlled by the export laws and regulations of the
United States of America. The U.S. Governement may restrict the
export or re-export of this product to certain individuals and/or des-
tinations. For further information, contact the U.S. Department of
Commerce,
Bureau
www.bis.doc.gov.
1 Product Overview
The 9522A L-Band Transceiver (LBT) is designed to be integrated
into a specific application with other hardware and software to pro-
duce a solution designed for a specific application or vertical market.
Some examples of these solutions include a maritime voice telepho-
ny terminal or a vehicle tracking solution.
The LBT functionally supports all of Iridium's voice and data servic-
es. Applications can be built to use one or multiple services using
the voice and data interfaces. The 9522A is a functional replacement
to the 9522 "Sebring" LBT. However it should be noted that there are
some differences to the voice interface.
The 9522A is regulatory approved for FCC, Canada, and CE assum-
ing an antenna with a gain of ≤ 3 dBi. This allows the LBT to be inte-
grated into a variety of subscriber products, or retrofitted into exist-
ing LBT-based products. These products, when integrated together
will require Regulatory testing to be conducted by the integrator.
The LBT is essentially provided as a 'black box' with all interfaces
provided via a DB25 connector. The product provides the core trans-
ceiver module and SIM card reader. All other functions and hardware
such as keypad, display, power supply, antenna etc. must be provid-
ed by the solution developer. The DB25 provides the following inter-
faces and connections:
• Analog Audio
• Control / Digital Audio
• RS232
• Power Input
• On / Off
2 Standards Compliance
The 9522A is designed to comply with the standards for Radio
Emissions Compliance, Electromagnetic Compatibility, and AC
Safety in the United States, European Union and Canada.
2.1 FCC Compliance
The 9522A is certified under 47 CFR Part 25 as FCC ID:Q639522A. It
also complies with Part 15 of the FCC Regulations. Operation is sub-
ject to the condition that this device does not cause harmful interfer-
ence. Any changes or modifications, including the use of a non-stan-
dard antenna, not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
IMPORTANT: To comply with FCC RF exposure requirements, a min-
imum separation of 20 cm is required between the antenna and all
persons.
2.2 CE Compliance
This product, when marked with the CE symbol, complies with the
European Community Council Directive for R&TTE, 99/5/EC, provid-
ed that the integrator/user adheres to the instructions detailed in this
LBT Interface Specification. This product is in compliance with appli-
cable ETSI standards. Compliance with the requirements of ETSI EN
301 489 requires the use of a shielded digital data interface cable.
1
2/1/05
5:00 PM
of
Industry
and
Page 4
Security
or
visit
Advertisement
Table of Contents
