Advertisement
Iridium 9523/9523N L-Band Tra nsce iver Integrator Devel opme nt Guide
Revis ion 7 .4
Export Compliance Information
This Product is controlled by the export laws and regulations of the United States of America. The U.S.
Government may restrict the export or re-export of this Product to certain individuals and/or destinations .
Diversion contrary to U.S. law is prohibited. For further information, contact the U.S. Department of
Commerce, Bureau of Industry and Security or visit www.bis.doc.gov.
Revision History
Revision
1.0
Nov 11, 2015
2.0
M ay 9, 2011
2.3
Jul 26, 2011
2.5
Sep 12, 2011
2.6
Oct 11, 2011
2.7
Oct 17, 2011
3.0
Oct 21, 2011
3.1
Oct 27, 2011
3.2
Feb 23, 2012
7.0
Aug 20, 2012
7.1
Jul 29, 2014
7.2 DRAFT2
Nov 17, 2015
7.2 DRAFT3
Jan 12, 2016
7.3
April 21, 2016
7.4
December 1, 2016
Proprietary & Confidential Information
Distribution of guide restricted to product dev elopers only . Inf ormation contained in this guide is subject to change without notice.
.
Date
First Draft.
Second Draft Following Internal Review
Revision sent with Alpha prototype Developer's Kit
Revision sent with Beta prototype Developer's Kit
- Added FCC and IC warning statements (sections 1.3 and 1.4)
- Removed reference to mounting screws in section 2.1 "Dimensions and
Layout"
- Clarified screw/hole specifications in section 2.2 "Field Application Board
M ounting"
- Unified formatting of examples and removed references to AT*Rn in section
8 "Informative Examples"
- Replaced reference to AT*F with AT*P0 in section 3.2.3 "Power On/Off
Control"
- Added note on digital I/O ESD protection in section 3.1.2 "User Connector
Pin Allocation"
First published revision
Added note on non-portable regulatory certification to section 1.2
Significantly reduced sections "Data/Fax Port" and "AT Interface" and added
references to the ISU AT Command Referenc e. Removed sections "S-Register
Definitions", "Summary of Result Codes", "Informative Examples", and
"Supported AT Commands" as this information is contained in the ISU AT
Command Reference.
- Updated section "Legal Disclaimer and Conditions of Use".
- Removed description of PCB digital audio ports as "15 bits" in section 3.3
"PCM Digital Audio" since the ports use 16-bit PCM samples.
- Changed all references to the product to "Iridium Core 9523"
- Corrected section 4 sub-section numbering
- Revised introductory paragraph of section 2.3.2
Updated to include 9523N. For internal review.
Incorporated comments from M ike Senzig.
Updated in accordance with comments from the IEC 60950-1 safety testing at
TUV (see Interim Test Summary_75932207_Issue1): Clarified part numbering
in section 2.1. Clarified number of power supplies and the nominal and
maximum voltage and maximum current in section 3.2.1 and included
recommendation to incorporate a current limiting device in the host
application. Added details on requirements of the enclosure provided by the
host product/application in section 2.2. Updated Declaration of Conformity.
Updated in accordance with comments from the IEC 60950-1 safety testing at
TUV (see Interim Test Summary_75932207_Issue2): Changed table 4 to read
'M odel' instead of 'Product', Updated paragraph 11 and 12 in section 2.2.
Updated standards versions in Table 2.
Final review prior to publish on IFP
Comment
3
Advertisement
