Advertisement
Quick Links
Quickstart Guide:
iTalk2™ & iTalk2™ with Levels communicators
3
Record Messages
a
a. Press and Hold a switch top, begin speaking when
you hear a beep. Release when finished.
b. Repeat for second location.
RECORD Light will flash while recording.
1
Insert Battery and Turn On
Connect one 9-volt battery at the bottom of the device.
Rotate the Volume ON/OFF knob to turn the device on.
4
Exit Record Mode
b
Press and Release
Press and Release the RECORD button to exit Record
Mode.
NOTE: iTalk2 has 2 minutes of total recording time and
iTalk2 with Levels has 4 minutes. The light will turn yellow
and flash when only ten seconds of time remain.
2
On
Press and Hold the RECORD button until the RECORD
Light activates, then Release.
5
iTalk2 is now programmed and ready for use.
Enter Record Mode
Press and Hold,
then Release
Play Messages
Advertisement
Related Manuals for AbleNet iTalk2
Summary of Contents for AbleNet iTalk2
- Page 1 Repeat for second location. NOTE: iTalk2 has 2 minutes of total recording time and iTalk2 with Levels has 4 minutes. The light will turn yellow RECORD Light will flash while recording. and flash when only ten seconds of time remain.
- Page 2 Use these clear plasitc caps to secure pictures or symbols for increased flexibility. to the switch tops. Use the toggle switch on the side of the iTalk2 to select the iTalk2 also includes a built-in symbol holder at the top appropriate level. You can record separate messages for of the device.