What'snew Under The Lid - Kenmore 23102 Use & Care Manual

Top-loading washer
Table of Contents

Advertisement

Available languages

Available languages

®
WHAT'S NEW UNDER THE LiD?
Your new washer
will operate
diff:erently
than
your past agitator-style
washer.
Lid Lock
To allow
for higher
spin speeds, the lid will lock and the
Lid Locked
light will turn on. When
this light is lit, the lid
is locked
and cannot
be opened.
When
this light is blinking,
the washer
is paused.
When
this light is off:, the lid can be
opened.
After
a cycle is started,
water
will enter washer
and then lock. If you need to open the lid to add a garment
after
this point, you must press START/PAUSE/Unlock
Lid
and wait for the lid to unlock.
The lid will only unlock
after
washer
movement
has stopped.
Depending
on when in
the cycle you try to pause, it may take several
seconds to
several
minutes
for the lid to unlock.
Press START/PAUSE/
Unlock
Lid to resume the cycle.
©
<]Jll
Sensing
This washer
will perform
a series of spins to check
for load
balance.
During
this time, a series of clicks and a whirring
noise signal that sensing technology
is determining
if there
is an off-balance
load.
Sounds
At diff:erent
stages of the wash cycle, you may hear sounds
and pauses that are different
from those of your
previous
washer.
For example,
you may hear a clicking
and hum
at the beginning
of the cycle as the lid lock goes through
a self-test.
There will be different
kinds of humming
and
whirring
sounds as the agitator
tests for load
balance
or
moves the load.
And, sometimes,
you may hear nothing
at all as the washer
allows
time for clothes
to soak.
IMPORTANT:
* After the washer
basket
fills to the selected
water
level, the lid must be closed
before
the wash cycle can start.
If filling
stops with the lid open, close lid and press START button.
* A Fabric
Softener
option
must be selected
to ensure fabric
softener
dispenses
at the correct
time.
4

Advertisement

Table of Contents
loading

Table of Contents