Overview Of Fdsb229; Details For Ordering - Siemens FDSB221 Technical Manual

Structure and function
3

Overview of FDSB229

3.2
3.3
14
Building Technologies
Fire Safety
Overview of FDSB229
Overview of FDSB229
The sounder beacon interbase FDSB229 provides an optical and acoustic alarm in
an addressed fire detection system FS20.
The sounder beacon interbase FDSB229 can be activated by any point detector
via the control panel.
If a fire alarm is triggered, the loud sound of the interbase can be clearly
recognized as a danger signal and LEDs give a visual indication of the danger.
Eleven tones are programmed in the interbase. Two tones can be activated for
different events (e.g. alarm and evacuation).
There are five programmable brightness levels. There are two types of optical
signal.
If a point detector is not used, the cover plate FDBZ296 (accessory) can be fitted
on the interbase.
Features
Addressable on the FDnet detector loop

Communication with the control panel via the detector loop

Supply via detector loop

Compatible with all 'Sinteso' detector bases

Compatible with all 'Sinteso' point detectors

Integrated line separation function

Self test function

Yellow LED in interbase to indicate servicing required

Synchronization of sounds with all alarm sounders, interbases and audible

bases on the same detector loop
No additional detector base required

Optical signal transmitter


Details for ordering

Type Order no.
FDSB221 S54372-F16-A1
FDSB229 S54372-F17-A1
Designation
Sounder interbase
Sounder beacon interbase
A6V10320090_c_en_--
02.11.2011