Indicator/Display - Ecom Instruments Ex-PMR 500 Instruction Manual

8.6. Indication/Display
Picture of display
1. Transmission indicator TX
Indicates that the radio device locates itself on transmission
2. Dual function activation – indicator F
This indicator can be seen as long as though the function button (left side) has
activated the second function of the button. Release the FUNC button and the
indicator disappears. Only the first function of the button is available.
3. Three channel surveillance – indicator DW
Signalises that the two channel surveillance is activated
4. Pilot procedure TSQ
Indicates that the pilot procedure CTCSS or DCS is activated. The abbreviation
stands for tone-squelch.
5. Mechanical signal giver
The mechanical signal giver is deactivated by this device.
6. Accu saving switch PS
If the activated battery saving switch can be seen, the closed low noise barrier
flashes.
7. Button locking
Indicates that the buttons are locked to avoid inadvertent alterations. Switch free
by pressing FUNC + PS/LOCK
8. Reception tone
If the reception tone is activated, a music symbol can be seen.
9. Acoustic signalizing
If this symbol can be seen, the receiving will be signalized by an acoustic sound.
14