Removing The Pickup Unit - Canon AJ1 Service Manual

4. Disassembly/Assembly

Removing the Pickup Unit

■ Preparation
1. "Removing the Rear Cover" on page 28
■ Procedure
1. Disconnect the connector [1] and remove the Edge Saddle [2].
[2] [1]
1x
1x
2. Open the Right Cover [1], and remove the Cassette [2].
[2]
[1]
3. Open the Wire Saddle [1] and pull out the harness [2] from the hole [A].
1x
[1] [A] [2]
39