Cassette Left Edge Margin Adjustment (1St Side: Software Adjustment) - Canon AJ1 Service Manual

6. Return the cassettes to their original positions.
NOTE:
If you are concerned with the difference in level of the cassettes after mechanical adjustment, adjust it by loosening the 2 screws.
7. Copy from the cassette, and check that the left edge margin is within 2.5mm +/- 1.5mm.
Cassette Left Edge Margin Adjustment (1st Side: Software
Adjustment)
Copy from the cassette, and check that the left edge margin is within 2.5 +/- 1.5mm (in the case of LTR/LGL: 4.2 +/- 1.5 mm).
When it is out of the specified range, perform the following procedure.
1. Change the left edge margin adjustment value for the 1st side of the cassette.
• Service mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1
When the value is increased by 1, the left edge margin is increased by 0.1 mm. (The image moves to the right.)
2. Copy from the cassette, and check that the left edge margin is within 2.5mm +/- 1.5mm.
1x
Feeding direction
of paper
46
1x
image
5. Adjustment