Canon AJ1 Service Manual page 32

4. Remove the 2 Face Covers [1].
• 2 Claws [2]
• 2 Hooks [3]
5. Remove the 2 Connecting Plates [1].
• 2 Knurled Screws [2]
6. Hold the indented area [A] of the host machine and lift it down from the equipment.
CAUTION:
• When lifting down the host machine from the equipment, be sure to perform the work while holding the machine in
parallel.
• Be sure to perform the work in accordance with the standard to handle a heavy load in each country.
• Because the center of gravity will be placed at rear, be careful not to lose balance when lifting it.
2x
[2]
[1]
[3]
2x
[2] [1]
[A]
27
4. Disassembly/Assembly
[A]