Led Indicator - Inateck BR1008 Instruction Manual

2) Turn off the BR1008, switch RX (TX) mode to TX (RX) mode after 5
seconds.
After that, the pairing history of TX (RX) mode will be cleared.
6. RX Mode: Pause/Play
Press the Multifunction Button to pause or play while playing music.
7. The product won't automatically power off to ensure uninterrupted
user's experience. When not connecting the device to power, please
turn it off after use.
8. Press and hold power button first while connect the device to power
via charging cable to reset the BR1008.
9. The device would automatically select an optimal audio CODEC
supported both under TX and RX modes.The audio CODEC priority of
the BR1008 goes as: aptX Low Latency ＞ aptX HD ＞ aptX ＞ AAC ＞
SBC.

LED Indicator

LED Indicator
Blue and red LED flash alternately
Blue LED flashes twice every 3 seconds
Blue LED flashes 4 times every 10 seconds
Blue LED flashes 3 times every 10 seconds
Blue LED flashes twice every 10 seconds
Blue LED flashes once every 10 seconds
Solid green
3
Status
In pairing mode
Automatically Pairing with Previously Paired
Devices
Successfully paired with aptX HD
Successfully paired with aptX low latency
Successfully paired with aptX
Successfully paired with SBC or AAC
Pair with two devices at the same time