Common Functions - Inateck BR1008 Instruction Manual

Note
a. Poor quality power adapters do not provide a stable current , which
may generate current noises when in use.
b. Please recharge the device once a month if the device is not in regular
use. Lithium-Ion batteries continue to slowly discharge (self-discharge)
when not in use or while in storage.

Common Functions

1. Power On/Off
Press and hold the Multifunction Button for 3 seconds.
Power on: the LED indicator will blink blue.
Power off: the LED indicator will blink red and automatically turn off.
2. Automatically Pairing with Previously Paired Devices
BR1008 will enter pairing mode automatically when powered on for
the first time. BR1008 can remember previously paired devices and
will attempt to pair with devices automatically, without going into
pairing mode.
3. Quick Pairing
Quickly double-click the Multifunction Button to enter pairing mode
after the BR1008 is powered on.
4. TX/RX Mode Switch
RX/TX mode can only be successfully switched after the adapter is
turned off for 5 seconds.
Note: Turn off the BR1008 and restart it after 5 seconds if the mode
switch is not functioning properly.
5. Clear Pairing History
Please follow the guides below to clear the pairing history if pairing
failures are encountered:
1) Turn off the BR1008, switch TX (RX) mode to RX (TX) mode after 5
seconds, and then restart the BR1008.
2