Inateck BR1008 Instruction Manual page 2

English
Overview
Bluetooth transmitter mode (TX)
Charging
The RED LED indicator will flash three times continuously if the battery
level is low, which indicates charging is necessary.
1. Plug the USB end of the charging cable to a USB charging port or any
active USB port (charging power: DC 5V). Connect the Micro USB end
of the charging cable to the charging port of the BR1008.
2. The RED LED indicator will turn on when charging.
3. The LED indicator will automatically turn off when the device is fully
charged. It takes up to 2 hours to fully charge the Bluetooth adapter.
1
Multi-function button （MFB）
Bluetooth receiver mode (RX)
LED indicator
3.5mm audio port (AUX)
Micro USB charging port