Page 1
BR1002 Bluetooth transmitter and receiver Instruction Manual w w w . i n a t e c k . com...
Page 2
Bluetooth transmitter and receiver (English) Thank you for purchasing Inateck Bluetooth transmit- ter and receiver - BR1002. Before using it, please read this user guide carefully. Thank you. About BR1002 BR1002 is a Bluetooth transmit and receive of two in one adapter.
Please fully charge the battery before using the unit for the f irst time. Low battery: When you hear the BR1002 making three beeps during use, it means that the battery is in low power and needs to be charged.
TX Mode Selecting mode: please slide the TX/RX switch to the TX mode end before power on BR1002. Note: • This step must be done before power on the unit. • Do not switch the TX/RX mode after power on BR1002.
Page 5
Power on your Bluetooth stereo receiver device and make it getting into pairing mode. c. Press and hold multi-function button of the BR1002 for 9 seconds until the white LED f lashes quickly, now the unit gets into pairing mode.
Page 6
BR1002. Note: • This step must be done before power on the unit. • Do not switch the TX/RX mode after power on BR1002. 1. Pairing with Bluetooth devices Please make sure your audio device is Bluetooth-enabled.
Page 7
d. Connect the receiver to your headphone or home stereo playback device through a 3.5mm audio jack could also enjoy music. Notes: • This product has no built-in microphone. It was designed as a Bluetooth music player helper, which cannot be used for hands-free calls.
USB charging cable*1 User Manual*1 Support For any inquiries or comments concerning our products, please send an email to support@Inateck.com, and we will respond to you as soon as possible. Maintenance 1. Do not expose the product under liquid, moisture circumstance to avoid the product s internal circuit being damaged.