General; Fronius Signal Card; Overview - Fronius Signal Card Operating And Installation Instructions

General

Fronius Signal The Fronius Signal Card keeps you up-to-date with the operating status of
your inverter in real time. It may be used with the following inverters:
Card
-
-
-
Note the following special features of the Fronius Signal Card:
-
-
-
-
-

Overview

(1) Connection cable (2-pin or 3-pin sheathed cable)
(2) Component-free zone (route the connection cable so that it lies within
(3) Terminal
(4) Cable tie
(5) Relay
(6) Service code jumper
(7) Buzzer jumper
(8) Buzzer
(9) Strain-relief device for connection cable
Fronius IG
Fronius IG Plus
Fronius IG Plus V
The Fronius Signal Card is not a Fronius Solar Net component and
therefore does not require a Datalogger
The Fronius Signal Card is only available as a card and can only ever
monitor one inverter at a time
The Fronius Signal Card detects serious inverter malfunctions
If a malfunction is detected, the Fronius Signal Card trips a relay and
also emits an acoustic signal (see „Jumper" chapter)
The relay activates a consumer chosen by the user (e.g. a visual or
acoustic alarm)
(9)
this zone)
4
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)