Transfer T O Storage - Fresenius Medical Care GranuFlo Dissolution Unit II Operator's Manual

7.2 T T
RANSFER O

CAUTION! C
G F ® D
RANU LO
After you obtained a valid specific gravity reading, remove the Transfer Hose from the
1.
Transfer Nozzle.
Connect Transfer Hose to the storage tank and OPEN the Main Transfer Ball Valve at the side
2.
of the Filter Housing. Press the Dissolution START button to transfer concentrate into the
storage tank (Figure 15).
Once Transfer of solution is complete, CLOSE the Main Transfer Valve, and place Transfer Hose
3.
on to the GranuFlo Dissolution Unit II Transfer Hose Holder (see Figure 15). Do not leave
Transfer Hose attached to the Storage Tank.

CAUTION! I
F THE PUMP IS RUN DRY FOR LONGER THAN
P/N 450368 Rev I
S T
TORAGE ANK
CATALOG NUMBER
OMPARE THE
A C
RY CID ASE TO BE CERTAIN THEY ARE THE SAME
Compare Catalog
Number on
Storage Tank
to Catalog Number
on Fresenius Medical
Care
Acid Product.
st
1 - Connect Transfer
Hose to storage tank
Transfer hose
ON THE STORAGE TANK WITH THE
.
G F ®
RANU LO
Dry
rd
3 - Press
Figure 15
Dissolution
START button
30
SECONDS IT MAY CAUSE
CATALOG NUMBER
Transfer
Hose Holder
nd
2 - OPEN
Main Transfer
Ball Valve
P .
UMP FAILURE
ON THE
21