Cisco Aironet 1800s Getting Started Manual page 10

7
Mounting and Powering the Network Sensor
Cisco Aironet 1800s series network sensors can be mounted in a vertical orientation, on a wall or desk.
You can also mount the sensor on an electrical or network box. The mounting and powering options
are provided in the following table.
Network Sensor and
Powering Accessory Module
1800s network sensor with
PoE/Ethernet module
AIR-MOD-POE-xx
1800s network sensor with USB
adapter module
AIR-MOD-USB-xx
1800s network sensor with AC
adapter module
AIR-MOD-AC-xx
10
Power Supply Option(s)
• AC power, using the
AC-USB adapter
AIR-MOD-USB, supplying
5V DC, 1.5A power.
• PoE, 802.3af Class 0 power
or greater, from:
a network device or
–
power injector.
Cisco power injectors
–
AIR-PWRINJ5 (for
802.3af) or
AIR-PWRINJ6 (for
802.3at).
AC power, using the AC-USB
adapter AIR-MOD-USB,
supplying 5V DC, 1.5A power.
AC power from a wall socket
power outlet, through the AC
Adapter module, providing
120~240VAC, 50~60Hz power.
Mounting Option(s)
Vertical mounting on a wall or
desk, using
AIR-AP-BRACKET-NS.
See the "Mounting the Sensor
using AIR-AP-BRACKET-NS"
section on page 11.
The AC adapter module also
functions as a mounting cradle,
thereby mounting the sensor on
a wall socket power outlet.
See the "Mounting the Sensor
using AIR-MOD-AC-xx
Cradle" section on page 15.