Cisco Aironet 1800s Getting Started Manual page 8

5
Ports and Connectors on the 1800s
Figure 1 Status LED and Ports Location – Face of the Sensor
1
2
3
4
Reset button, on the right side of the sensor.
1
For information on how to use the Reset button, see
page 25.
Status LED.
2
For more information, see the
3 Kensington security lock slot, on the right side of the sensor.
For the 1800s wireless network sensor having the AIR-MOD-POE-xx PoE/Ethernet module, the
base of the sensor has a USB port and the PoE port (Gigabit Ethernet uplink port).
For the 1800s wireless network sensor having the AIR-MOD-AC-xx EU-specification AC
4
adapter module, the base of the sensor will have a power on-off switch.
8
"Network Sensor Status LED" section on page
"Using the Reset Button" section on
23.