Kickstarter; Seat - Yamaha AG100FA Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Kickstarter

1
1
2
3
4
1. Kickstarter
5
To start the engine, fold out the kick-
starter lever, move it down lightly with
6
your foot until the gears engage, and
then push it down smoothly but force-
7
fully. This model is equipped with a pri-
mary kickstarter, allowing the engine to
be started in any gear if the clutch is
8
disengaged. However, shifting the
transmission into the neutral position
9
before starting is recommended.
EAU13650

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
1. Bolt
1. Bolt
To install the seat
EAU13971
1. Insert the projection on the front of
1
1. Projection
2. Seat holder
2. Place the seat in the original posi-
1
TIP
Make sure that the seat is properly se-
cured before riding.
4-8
the seat into the seat holder as
shown.
1
2
tion, and then tighten the bolts.