Drive Chain Slack - Yamaha AG100FA Owner's Manual

Table of Contents

Advertisement

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.
To check the drive chain slack
1. Place the motorcycle on the side-
stand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the neu-
tral position.
3. Remove the drive chain slack
check hole cap.
1. Drive chain slack check hole cap
PERIODIC MAINTENANCE AND ADJUSTMENT
4. Measure the drive chain slack as
EAU22760
shown.
EAU49261
1. Drive chain slack
Drive chain slack:
20.0–30.0 mm (0.79–1.18 in)
5. If the drive chain slack is correct,
install the check hole cap. If the
drive chain slack is incorrect, ad-
just it as follows.
To adjust the drive chain slack
1
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Loosen the brake pedal free play
adjusting nut.
1
1. Brake pedal free play adjusting nut
EAU35025
1. Axle nut
2. Rear sprocket nut
3. Drive chain slack adjusting plate
7-19
1
2. Loosen the axle nut and the rear
sprocket nut.
2
3
1
(a)
3. To tighten the drive chain, turn the
drive chain slack adjusting plate on
2
3
4
5
(b)
6
7
8
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents