Specified fuse:
10.0 A
3. Turn the key to "ON" and turn on
the electrical circuits to check if the
devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the headlight bulb
If the headlight bulb burns out, replace
it as follows.
1. Remove the headlight unit by re-
moving the screw.
1
2
1. Headlight unit
2. Screw
2. Disconnect the headlight lead con-
nectors.
3. Remove the headlight bulb holder
by pushing it inward and turning it
counterclockwise, and then re-
move the burnt-out bulb.
7-27
EAU48970
1. Headlight bulb holder
4. Place a new bulb into position, and
then secure it with the bulb holder.
5. Install the headlight bulb holder by
pushing it in and turning it clock-
wise.
6. Connect the headlight lead con-
nectors.
7. Install the headlight unit by install-
ing the screw.
8. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
2
3
4
5
6
7
8
9