Display Menu - Thermo Scientific INNOVA Series Instruction Manual

Innova Series Operator's Manual

Display Menu

In the Display Menu the following may be viewed:
• Battery Capacity
• Peak Readings (Option to Clear)
• STEL Levels (Toxic Sensors Only)
• TWA Levels (Toxic Sensors Only)
• Temperature
• Date and Time
• Operator ID (Option to Change)
• Location ID (Option to Change)
• Exit
To enter the Display Menu:
1. Press and hold the ↓ RANGE button for 3 seconds. The display will
show "DISPLAY MENU" and count down from 3 seconds. Your first
screen will display the "BATTERY CAPACITY".
2. To scroll to the next screen, use the ↑ button. To scroll backwards
through the menu, press the ↓ button. Continue to scroll through the
screens to display the desired information, clear Peak Readings, or
change an Operator or User ID.
3. To exit the program, press either ↑ or ↓ until you get to the 'EXIT'
display, then press → to exit to the normal operating mode.
NOTE
When Peak values are displayed, after 3 seconds the display reads
"PRESS → TO CLEAR", so the user can clear peak values if desired.
To change a User or Operator ID:
NOTE
Operator and Location must first be entered before a selection can be
made, see Edit Operator, Location, and Instrument ID's Chapters.
1. For the Operator ID and Location ID screens, to change the selection
press the → button, and then use ↑ or ↓ to designate a new selection.
2. Press the → button to accept the selected ID.
18 71-6417