Table of Contents
Advertisement
U
This chapter includes an introduction to the Innova User Program and step-
by-step procedures to run the program.
About the User Program
The Innova User Program allows you to view and update factory-set
parameters and display several items, such as the battery voltage, datalog
status, current temperature, time, and date.
The menu-driven program has three main menus:
• Display Menu
• Advanced Features Menu
• Datalog Features Menu
The user navigates through the user program by using the three buttons:
• The right arrow (→) is used to accept within the menu.
• The up arrow ( ↑ ) and down arrow ( ↓ ) are used to scroll either
forward or backwards through the menus.
NOTE
The Innova has a time-out feature. If no buttons are pressed for 10
seconds while in the Display Menu, Advanced Features Menu or
Datalog Features Menu the display will flash and buzzer will beep for
10 seconds. If no buttons are pressed during this time, the Innova will
return to the normal operating mode.
71-6417
Chapter
4
P
SER
ROGRAM
→ ON/OFF
↑ AIR
↓ RANGE.
17
Advertisement
Table of Contents
