Audio Technica AEW-T5400 AEW-T3300 AEW-T6100 AEW-T4100 User Information page 2

Push the set button once
Using up or down arrow buttons and scrolls the menu until frequency menu appeared.
If current frequency setup appeared on the LCD is not the same as corresponding receiver frequency, push
set button once.
Push down or up arrow button and set frequency to the corresponding frequency as set on receiver.
Push and hold set button until word "Stored" displayed in a while.
Push up or down arrow button and scrolls the menu until input menu (MIC or INSTRUMENT) appeared.
If current input setup appeared on LCD screen is not correct, push set button once
Using up or down arrow button to select input.
Push and hold set button until word "Stored" displayed in a while.
Connect your microphone or guitar cable to the connector on the top of the transmitter.
Confirm that the receiver is receiving RF and the audio is passing through the receiver.
Push up or down arrow button and scrolls the menu until "ESCAPE" appeared.
Push the set button once to return default menu.
You are now ready to use the system.
PART 3. USING THE AEW-T5000SERIES HANDHELD TRANSMITTER
AEW -T5000 transmitter family is as follows:
AEW -T5400
AEW -T3300
AEW -T6100
AEW -T4100
The handheld transmitter operates on 2 "AA" batteries. Please make sure that your batteries are fresh.
We recommend that you use Alkaline batteries and that you avoid using NiCad if possible.
Hold the bottom grip and turn the top grip counter clockwise until bottom grip free to slide.
Slide the bottom grip, insert two batteries into the battery compartment and slide the battery compartment
back into place.
To change the frequency of operation, push and hold the power /mute button located on bottom of the
transmitter to turn it on.
Unscrew the battery cover and pull the cover back.
Push the set button once
Using up or down arrow button and scrolls the menu until frequency menu appeared.