Fluke LinkRunner Quick Reference Manual page 2

Entering an IP Address
Ping / LinkRunner Configuration
Press both action buttons simultane-
ously to access configuration (Ping
or LinkRunner ). If no
cable is connected, press to
access Configuration.
Note: Invalid addresses revert to the previous value
•
Ping Configuration Press to configure IP
(class D, E, 0.0.0.0, or 255.255.255.255).
addresses for pinging.
•
Manual IP
Press to highlight an
Configuration
item.
•
- press
for
DHCP on/off.
Note: manual IP address configuration changes will be
ignored until you turn off DHCP.
User-defined IP Addresses
- press to enter user-defined IP addresses
(up to 4 common IP address ping targets).
•
Press to cycle through ping targets 0 - 4. Tar-
get 0 means you don't want to ping a target.
•
Press to access IP edit-
ing then press to begin
editing the selected target.
•
• LinkRunner From the Ping/LinkRunner
Press to increment
Configuration Configuration screen, press
each digit.
•
Press to advance.
tion.
•
Press to exit.
•
Displayed are the LinkRunner
MAC address and version.
•
Press
meters.
•
Press
•
- press to access IP
Configuration. Other Features and Functions
•
Press to highlight an
Unpowered
address: Token Ring
Device
LinkRunner IP address
No DHCP
Subnet Mask Telco
Server found
Default Router
Auto-off: unit powers off after 5 minutes of inactivity
•
Press the right selection button
(auto-off disabled during ping or cable locate tasks).
to begin editing an address.
Restore Factory Defaults: press power button as you
•
Press to then .
press both selection buttons.
Ping Responder: In ping mode LinkRunner responds
to pings from other devices.
Duplicate IP
addresses found
Help ? Technical Assistance Center
Have a question about using LinkRunner? Contact the
LinkRunner Configura-
Technical Assistance Center at one of the numbers
listed or e-mail: support@flukenetworks.com.
1-800-283-5853 Japan
USA
to select feet or Canada 1-800-363-5853 China
Europe +31-402-675-200 Singapore
to exit.
Anywhere +1-425-446-4519
You can also visit the Fluke Networks Knowledge Base
at http://kb.flukenetworks.com.
Accessories
Buy LinkRunner accessories or other network test
products by contacting a Fluke Networks representa-
tive or send e-mail to: sales@flukenetworks.com. For
more information go to
+81-3-3434-0181
www.flukenetworks.com/linkrunner.
+86-10-6512-3435
Accessories Part No.
+65-6-738-5655
Cable ID Kit (IDs 1-8) 1665935
Clip Set 1668377
Toner Receiver 1667985
Wiremap Adapter (ID #0) 1668404
Rechargeable Batteries 1572184
Battery Charger 1572191
RJ-45 Coupler 1668361
h
Cleaning Clean unit with a damp cloth.
Caution If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the equipment may be impaired.
Warranty LinkRunner carries a one-year warranty. Find
out more at
www.flukenetworks.com/linkrunner.
Specifications
P
European directive
st nd
Meets EN61010-1 1 and 2 editions.
Meets EN61326 Class A, for ESD criteria C, FCC part 15
$
Class A.
Canadian Nationally Recognized Test Laboratory for U.S.
and Canada
j
Meets CSA/CAN C22.2 No.1010.1-92, UL3111-1.
;
Not intended to be connected to telecommunication line.
Meets C-Tick EMC standard.
N10140