Application Features; Table 4.3-1 Equipment Configuration - Zte Unitrans ZXMP M600 Technical Instructions

ZXMP M600 (V1.0) Technical Manual
4.3.1.2 Equipment Configuration
Based on the service requirements as shown in Fig. 4.3-2, the configurations of the
nodes are shown in Table 4.3-1.
Configuration Type
CWU shelf
SMU shelf
NCP
PCWAS
OMD5-1
OMD4-5
OAD3
OTUq (two-channel bidirectional) 3
OTUp+(single-channel
protection)
SRM42
GEM2

4.3.2 Application Features

1.
2.
3.
4.

Table 4.3-1 Equipment Configuration

When ordinary fibers are used, the ZXMP M600 can implement 8+1 wavelength
service in a single node. In this case, the 1310nm wavelength can transmit both
monitoring service and general services.
The ZXMP M600 can access multiple services such as STM-N and ATM
services. It can also implement the multiplexing function from low rate to high
rate and improve the bandwidth.
When configured with an OTU board with the protection function (that is,
OTUp+), the ZXMP M600 can implement 1+1 channel protection to guarantee
network security.
As the ZXMP M600 does not support optical power amplification, its
requirement for optical parts such as laser is lower than that of DWDM
equipment. In addition, it features compact structure and flexible configuration
and is suitable for different spans of LAN and MAN.
Configuration Quantity
A B C
3 1 1
2 —— ——
1 1 1
10 2 2
2 —— ——
1 —— ——
—— 1 1
1 1
2 1 1
1 —— ——
1 —— ——
4-10
D E
1 1
2 ——
1 1
6 2
—— ——
—— ——
1 1
—— 1
—— ——
1 ——
1 ——