Yale YRDZB Manual page 18

PIN code structure
Maximum number of user codes is 250 with Network Module; without Network Module,
maximum is 25 user codes.
Set Up User PIN Codes
User PIN Codes can only be programmed through the Master PIN Code*.
1. Touch the screen with the back of your hand or fingers to activate
2. Enter the 4-8 digit Master PIN code followed by the
Lock Response: "Menu mode, enter number, press the
3. Enter "2" followed by the
4. Enter "1" followed by the
5. Enter the User Number to be registered (1-25) followed by the
6. Enter a 4-8 digit PIN code for the User number followed by the
7. To continue adding users press the
8. Press the
Note: When registering User codes, the code must be entered within 20 seconds or
time expires, Lock Response: "Time expired", no codes are registered and the process
must be re-started.
*Master PIN code must be registered before User codes can be added.
Open Door with PIN Code
1
Touch lock with
back of hand or
fingers to activate.
An ASSA ABLOY Group brand
key.
key.
key to complete the process and conclude the programming session.
2
Enter PIN code.
key.
key to continue."
key.
3
Press the
to confirm the
selection.
.
key.
key.
key
P/N AYRT-220-INST-FUL Rev A
17