Table of Contents
Advertisement
1.2.1
There are 5 categories command parameter as following:
· Scale
Two numerical value linked by hyphen in angle brackets (< >) means this parameter is some number in the
range of those two numbers.
For example:
INTEGER<1-10>
valid number.
· IP address
The prompt which is in the form of A.B.C.D. means the parameter is an IP address. A valid IP address is
needed to input.
For example:
192.168.0.100
· MAC address
The prompt which is in the form of H:H:H:H:H:H means the parameter is a MAC address. A valid MAC
address is needed to input. If a multicast MAC address is needed, there will be related prompt.
For example:
01:02:03:04:05:06
· Interface list
The prompt of interface list is STRING<3-4>. Interface parameter interface-num is in the form of
interface-type + interface-number. Interface-type is Ethernet and interface-number is slot-num/port-num, in which
slot-num is in the range of 0 to 2, and port-num is in the range of 1 to 24. Seriate interfaces with the same type can be
linked by to keyword, but the port number to the right of the to keyword must be larger than the one to the left of the
keyword, and this argument only can be repeated for up to 3 times. The special declaration of interface parameter
interface list will be displayed in the command.
For example:
show spanning-tree interface ethernet 0/1 ethernet 0/3 to ethernet 0/5
means displaying spanning-tree information of interface ethernet 0/1 ethernet 0/3 to ethernet 0/5
· Character string
The prompt which is in the form of STRING<3-4> means the parameter is a character string which is in the
form of 1 to 19 characters. "?"can be inputted to display the concrete command description.
1.3
User management
There are 2 privileges for user:
· administrator
· normal user
Normal user can only enter user mode not privileged mode after logging in, so that he can only see system
information but not to configure it. Administrator has the right to enter all modes, and query and configure all
parameters.
Command Parameter Categories
means user can input any integer between 1 and 10 (include 1 and 10), such as 8 is a
is a valid IP address.
is a valid MAC address.
1-15
Advertisement
Table of Contents
