Motorola MBP28 Quick Start Manual

Quick Start Guide
MBP28, MBP28/2, MBP28/3, MBP28/4
MBP28 Twin, MBP28 Triple, MBP28 Quad
For a full explanation of all features and instructions, please refer to
the User's Guide.
1. Setting up your digital baby monitor
1.1 Camera unit power supply
1. Insert the DC plug of the power adapter with the smaller DC
plug into the DC socket in the side of the camera unit, as
shown.
2. Connect the other end of the power adapter to a suitable mains
socket or power outlet.
DC SOCKET
DC PLUG
1
1.2 Parent unit battery installation
A rechargeable battery pack is supplied and should be fitted, so that
the parent unit can be moved without losing the link and picture from
the camera unit(s). Charge the parent unit before you use it for the
first time or when the parent unit indicates that the battery is low.
1. Take off the belt clip/stand.
2. Slide off the battery compartment cover.
3. Insert the plug of the battery pack into the socket inside the
battery compartment, and fit the battery pack into the
compartment.
4. Replace the battery compartment cover and reinstall the belt
clip/stand (refer to section 1.3).
5. Insert the DC plug of the power adapter with the bigger DC plug
into the DC socket in the side of the parent unit.
6. Connect the other end of the power adapter to a suitable mains
socket or power outlet.
7. The Charging Indicator comes on.
Battery SOCKET
Battery PLUG
2