Brewing Coffee Drinks; Brewing Coffee With Pre-Ground Coffee; Dispensing Hot Water; Brewing Milk-Based Drinks - Philips EP5934 User Manual

English
12

Brewing coffee drinks

Brewing coffee with beans
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To brew a coffee, press one of the one-touch drink buttons. To select another type of coffee, press
the MENU button, select DRINKS, scroll down to the desired drink and press the OK button ( ).
3 To stop dispensing coffee, press the OK button ( ).

Brewing milk-based drinks

LatteGo consists of a milk container, a frame and a storage lid. To avoid leakage, make sure the frame
and the milk container are properly assembled as described below before you fill the milk container.
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To assemble LatteGo, first insert the top of the milk container under the hook at the top of the
frame (Fig. 12). Then press home the bottom part of the milk container. You hear a click when it
locks into place (Fig. 13).
Note: Make sure that the milk container and the frame are clean before you connect them,
especially the surfaces where these parts connect.
3 Slightly tilt LatteGo and put it on the hot water dispensing spout (Fig. 14). Then press it home until it
locks into place (Fig. 15).
4 Fill LatteGo with milk up to the level indicated on the milk container for the drink you are brewing
(Fig. 16). Do not fill beyond the MAX indication.
Note: If you have personalized drinks and adjusted the milk volume, then you may need to fill the
milk container with more or less milk than indicated for this drink on LatteGo.
Aways use milk coming directly from the fridge for optimal results.
5 Place a cup on the drip tray.
6 To brew a milk-based drink, press one of the one-touch drink buttons. To select another type of
milk-based drink, press the MENU button, select DRINKS, scroll down to the desired drink and
press the OK button ( ). The display reminds you to put LatteGo onto the machine.
After brewing milk-based coffee beverages, the display indicates that you can clean LatteGo. For the
best hygiene, we strongly advise you to clean LatteGo after every use in the dishwasher or by rinsing it
under the tap. If the milk container is not empty yet or if you want to brew another milk-based drink
later, you can easily store LatteGo in the fridge. In this case we advise you to use the LatteGo QUICK
CLEAN function before storage. Go to the MENU to activate LatteGo QUICK CLEAN.

Brewing coffee with pre-ground coffee

1 Open the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee
compartment (Fig. 17). Then close the lid.
2 Place a cup under the coffee dispensing spout. For smaller cups you can use the espresso stand.
3 Press the AROMA STRENGTH button and select the pre-ground coffee brewing function. Press the
ESPRESSO button.
Note: With pre-ground coffee you can only brew one coffee at a time.

Dispensing hot water

1 If attached, remove LatteGo from the machine.
2 Press the MENU button. Select DRINKS, confirm and scroll to select HOT WATER.
3 Press the OK button ( ) to confirm. The machine starts dispensing hot water.
4 To stop dispensing hot water, press the OK button ( ).