Honda 08E10-TK6-100 Installation Instructions Manual page 8

Installing the Passenger's Side Ambient Light
34. Remove the insulator from the passenger's
dashboard undercover.
PASSENGER'S
DASHBOARD
UNDERCOVER
35. Fit the right template (R) onto the passenger's
dashboard undercover at the position shown.
RIGHT
TEMPLATE (R)
8 of 10
INSULATOR
PASSENGER'S
DASHBOARD
UNDERCOVER
36. Using a pushpin, pierce the center of the two scribe
marks on the right template (R).
RIGHT
TEMPLATE (R)
Remove.
PUSHPIN
37. Remove the right template (R).
830411AT
38. While wearing eye protection, drill the pierced marks
using a 3.5 mm drill bit.
DRILL
(3.5 mm drill bit)
830412BT
AII 45980 (1108)
SCRIBE
MARKS
PASSENGER'S
DASHBOARD
UNDERCOVER
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
830413BT
PIERCED
POINTS
830414AT