Honda 08E10-TK6-100 Installation Instructions Manual page 3

Routing the Ambient Light Harness
6. Using isopropyl alcohol, clean the fuse case where
the fuse label will attach.
AMBIENT
LIGHT
HARNESS
7. Attach the fuse label (2A AMBIENT LIGHT) to the
fuse case on the ambient light harness.
8. Without accessory fog lights: Unplug the vehicle
13-pin connector from the mirror switch, and plug it
into the ambient light harness 13-pin connector.
Plug the ambient light harness 13-pin connector into
the mirror switch.
VEHICLE 13-PIN
CONNECTOR
AMBIENT
2 AMBIENT LIGHT
LIGHT
HARNESS
HARNESS
13-PIN CONNECTORS
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
FUSE CASE
Clean.
FUSE LABEL
(2A AMBIENT LIGHT)
7D0627AT
MIRROR
SWITCH
830416AT
9. With accessory fog lights: Unplug the vehicle
13-pin connector from the fog light harness, and plug
it into the ambient light harness 13-pin connector.
Plug the other ambient light harness 13-pin
connector into the fog light harness 13-pin
connector.
FOG LIGHT HARNESS
13-PIN CONNECTOR
AMBIENT LIGHT HARNESS
13-PIN CONNECTORS
10. Secure the 13-pin connector.
Without Fog Lights: Using one wire tie, secure the
excess ambient light harness and connector to the
vehicle harness.
WIRE
TIE
AMBIENT LIGHT
HARNESS
With Fog Lights: Secure the two 13-pin connectors
to the fog light harness using one wire tie for each
connector.
FOG LIGHT
HARNESS
WIRE
TIE
AII 45980 (1108)
VEHICLE 13-PIN
CONNECTOR
VEHICLE
HARNESS
13-PIN CONNECTORS
AMBIENT LIGHT
HARNESS
MIRROR
SWITCH
830417BT
830418BT
3 of 10