Safety Instructions - Epcom EPIG1K User Manual

Th e EPIG1K / EPIG2K
use and may only be operated with PV arrays (PV modules and cabling) of protection
class II... Do not connect any sources of energy other than PV modules to the inverter.
Any other use can result in personal injury or property damage.

2.2 Safety instructions

<<3
Se i r s e n i v e t r r e
DANGER!
Danger to life due to high voltages in the inverter!
High voltages that can result in electrical shocks are present in the
conductive component parts of the inverter.
All work on the inverter may be carried out by qualified personnel
only.
DANGER!
Danger of burn injuries due to hot enclosure parts.
Do not touch enclosure during operation.
Only touch the lid during operation.
DANGER!
Before opening the housing, the inverter must be disconnected
from the grid and PV generator; while you must wait at least 5
minutes to let the energy storage capacitors fully discharged after
disconnecting from the power sources.
WARNING!
The installation must be performed in full compliance with
national and local standards and regulations.
is suitable for indoor and outdoor