Epcom EPIG1K User Manual page 26

Check Grid
Feeding Grid
b. Monitoring Parameter Messages
Operation Condition
Instantaneous Output
Power
Accumulated energy
information
Today's energy
information
Grid Voltage and Current
Grid Frequency
PV Array Voltage and
Current
c. System information Messages
Operation Condition
Model Display
Software version
Waiting for reconnect to
the grid
d. System Fault Messages
Operation Condition
Isolation Failure
Connecting When PV voltage > 150V, inverter is
xxxS checking feeding conditions
Working Inverter is feeding power to the grid
Messages Descriptions
Pac=
The real time output power in xxxx.xW
xxxx.xW
Energy= Total energy has been fed to the grid ince
xxxxxxkWh inverter was installed
Etoday= Total Energy that has been fed to the grid
xxx.xkWh today.
AC:xxx.xV Grid Voltage in xxx.x VAC, feeding urrent
xx.xxA in xx.xxA
Freq:
Grid frequency in xx.xxHz
xx.xxHz
PV:xxx.xV
Input voltage and current from PV array,
xx.xxA
Messages Descriptions
EAxKLPV Inverter Model
vx.xx Software version
Reconnect
The waiting time for reconnect to the grid
in xxx S
Messages Descriptions and corrective measure
The resistance between the PV + or PV –
Isolation
and grounding is outside the permissible
Fault
range, <500K.
24>>