Hmi Devices For S7-200 Smart - Siemens SIMATIC S7 System Manual

1.5

HMI devices for S7-200 SMART

The S7-200 SMART supports Comfort HMIs, SMART HMIs, Basic HMIs and Micro HMIs.
The TD400C and the SMART LINE Touch Panel are shown below. Refer to "HMIs and
communication drivers" (Page 398) for a list of supported devices.
Table 1- 6 HMI devices
The Text Display wizard in STEP 7-Micro/WIN SMART helps you configure Text Display
messages quickly and easily for the TD400C. To start the Text Display wizard, select the
"Text Display" command from the "Tools" menu.
The SIMATIC Text Display (TD) User Manual can be downloaded from the Siemens
customer support web site (http://www.siemens.com/automation/).
S7-200 SMART
System Manual, V2.3, 07/2017, A5E03822230-AF
Text Display unit: The TD400C is an RS485-only display device that can be
connected to the CPU. Using the Text Display wizard, you can easily pro-
gram your CPU to display text messages and other data pertaining to your
application.
The TD400C device provides a low-cost interface to your application by
allowing you to view, monitor, and change the process variables pertaining
to your application.
SMART HMIs: The SMART LINE Touch Panel provides operating and
monitoring functions for small-scale machines and plants. Short configura-
tion and commissioning times, their configuration in WinCC flexible (ASIA
version), and a double-port Ethernet/RS485 interface form the highlights of
these HMIs.
Product overview
1.5 HMI devices for S7-200 SMART
27