Digital Watchdog MEGApix DWC-MB72I4V Quick Start Manual page 2

Step 4 – DW IP FINDER
™
Use the DW IP Finder ™ included in the camera's accessory CD to scan the network and detect all MEGApix
perform firmware upgrade or access the camera's web client.
Search for Filter Search
Cameras Results
DWC-­‐MF10M28T
DWC-­‐MF21M4TIR
Firmware Upgrade
Network Setup
1. Run the CD included with the camera and click on the DW IP Finder
2. The software will scan your network for all supported cameras and display the results in the table. Allow up to 5 seconds for the IP Finder to find the camera
on the network.
3. Select a camera from the list by double-clicking on the camera's image or clicking on the 'Click' button under the IP Conf. column. The camera's network
information will appear. If necessary, you can adjust the camera's network type.
Select DHCP if the internet service is dynamic IP. This will allow the camera to receive its IP address from the DHCP server.
Select STATIC to manually enter the camera's IP address, subnet mask, Gateway and DNS information.
Contact your network administrator for more information.
4. The camera's default network information is:
Default TCP/IP information
• IP: 192.168.1.80
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1
• DNS: 168.126.63.1
®
Camera's Network Settings
Camera Name,
Model, IP Address,
and MAC Address
DWC-­‐MF10M28T
DWC-­‐MF21M4TIR
Open Camera's IP
Configuration Screen
™ file.
cameras, set the camera's network settings,
Camera's Firmware
View Camera's
Thumbnail View
Camera Uptime
Quick Start Guide
5.
To view the camera's web viewer, click on 'View Camera Website'.
'Port Forwarding' has to be set in your network's router for
external access to the camera.
6. To save the changes made to the camera's settings, input the ID
and PW of the camera for authentication and click 'Save'.
7. If the camera needs to be rebooted after the settings were
changed, press the 'Reboot' button. The camera will cycle power
and will appear back in the search results once the reboot is
complete.
Default ID / PW : admin / admin
Step 5 – WEB VIEWER
Once the camera's network settings have been setup properly,
you can access the camera's web viewer using the DW IP Finder
To open the camera's web viewer:
1. Find the camera using the DW IP Finder
2. Double-click on the camera's view in the results table.
3. Press the 'View Camera Website'. The camera's web viewer
will open up in your default web browser.
4. Enter the camera's username and password (default are
admin / admin).
5. If you are accessing the camera for the first time, install the
VLC files in order to view video from the camera.
Note: Please see the full product manual for web viewer setup,
functions and camera settings options.
Rev Date: 8/15 © 2015 Digital Watchdog. All rights reserved.
™ .
.
™