Table of Contents
Advertisement
Sounds
You can use the Sounds feature to customize various sound
settings, such as the:
• Ring volume, type, and tone
• Alert sounds
Ring
Ring Volume
This option allows you to adjust the ringing volume to one of
nine levels. You can also turn the ringer off. Use the
key on the left side of the phone. The greater the number of
bars, the greater the volume. You will also hear a sample
tone.
Note: During an incoming call, you can mute the ringer by
pressing
key.
END/
Ring Type
This option allows you to indicate how you are to be informed
of any incoming calls. The following options are available.
Bell: The phone rings using the ring tone selected via the
menu option.
Lamp: The backlight is switched on and the lamp blinks; the
phone neither rings nor vibrates.
Vibrator: The phone vibrates but does not ring.
Vib + Bell: The phone vibrates first, then rings.
36
Sounds
Ring Tone
This option allows you to select the required ringing tone. You
can choose among 13 different tones or melodies. Each time
you select a tone, it is played for a few seconds.
MENU 3-1
or
Key Volume
This option allows you to adjust the tone volume that the
keypad generates when you press a key. You can also use
or
key on the left side of the phone to adjust key
volume in the idle mode.
Alert
Minute Beep
With this menu option set to ON, the phone beeps every
minute during an outgoing call to keep you informed of the
duration of your call.
Service Area
With this menu option set to ON, the phone beeps when you
exit service area or when you return to a service area.
Alarm
The option allows you to set the alarm to ring at a specific
time.
The following options are available.
Daily: the alarm rings every day at the same time.
One Time: the alarm rings only once and is then deactivated.
MENU 3-2
MENU 3-3
MENU 3-4
37
Sounds
Advertisement
Table of Contents
