Table of Contents
Advertisement
T1: Connect with the 'TLP' in PSTN control panel
R1: Connect with the 'RING' in PSTN control panel
T2: Connect with the Land Line
R2: Connect with the Land Line
(Notice: No connection means the control panel will transmit the message only via GPRS.)
st
OUT1: 1
Outputs, OC type.
COM: General terminal.
nd
OUT2: 2
Outputs, OC type.
6. Indicator Lights
[RED]: GMS Indicator, blinking every 0.5s = registering the network, when the GSM signal is
normal, it will blink every 1s.
[RED]: Power Supply Indicator, blinking every 1s = the battery is on charge, ON means the
battery is in full charge, OFF means disconnected from the external power adapter.
[RED]: GPRS Data Indicator, it will blink every 1s when WGSMSC is transferring GPRS data.
[RED]: Eth ernet indicator, it will keep blinking wh en WGSMSC is transferring GPRS
data; ON means Ethernet connect to the server successfully.
7. Connection
Page 5 of 14
Ver 1.2
Date: 20170805
Advertisement
Table of Contents
