Table of Contents
Advertisement
8.4.0 Engineer Debug for GPRS Data Transmission.
9. SMS Commands
Th e SMS commands below are sent to th e SIM card of WGSMSC for remote configuration. Best
used when you are not able to program the WGSMSC by the PC configurator.
Notice:
1) All the letters in SMS commands must be CAPITALIZED under the English format.
2) The Examples below are only for reference, send the SMS commands according to your actual situations.
3) The Password below is the default password (1234), please use the new password in the SMS commands when the
default password was changed.
1) when the wrong SMS commands was send:
SMS Commands
Notice:
If any SMS command with the wrong format was send, you will receive a SMS notification as above.
2） When the external DC Power loss/Recovery
DC Loss
DC Recovery
3） Change the password (The default password is 1234, with 4 digits):
SMS Commands
Old Password＋P＋New Password
For Examples: 1234P4321
Notice:
When the password was forgot, please reset the device from the PC configurator.
Page 11 of 14
Return SMS Message
SMS Format Error, Please check Caps Lock in Command!
Return SMS Message
External DC Power Goes OFF
External DC Power Goes ON
Return SMS Message
【New Password】,This is the New Password, please remember it carefully.
【
】
4321
,This is the New Password, please remember it carefully.
Ver 1.2
Date: 20170805
Advertisement
Table of Contents
