1. Introduction
The GSM/3G/4G Communicator WGSMSC is specially designed for existing Watchguard alarm systems.
The GSM/3G/4G Communicator WGSMSC can transfer the Alert Message from your PSTN Contact ID (SIA
DC-05) Control panel into SIA DC-09 protocol over Ethernet/GPRS network and SMS notification. It can
change alert notifications from traditional PSTN alert to Ethernet/wireless alert (SIA standard DC-09
requirements).
(
Notice:
'WGSMSC' will be written in the following contents below instead of 'GSM/3G/4G LTE
Communicator WGSMSC'
2. Specifications
Signal Frequency
Communication Ways
Message Transmission Protocols
Outputs
Configuration
Power Supply
Used Current
Workplace
Backup battery
Exterior dimension
3. Features
Easy programmed by PC configuration, compatible with most alarm panels.
Modular system, upgrade 3G/4G only need to replace the module.
Supports transferring data by PSTN Ethernet or GPRS, SMS ( no phone
call ),
Supports 2 different CMS centers (IP addresses or DNS server).
Page 3 of 14
)
GSM850 / 900 / 1800 / 1900 MHz (3G/4G module optional) ;
For example: Customer only need to replace the module for
upgrading WGSMSC from 3G to 4G
Ethernet & TCP/IP via GPRS
SIA DC-09-2007 or SIA DC-09-2012 (WGSMSC)
SIA DC-05 (PSTN Control Panel)
OUT1, OUT2 ,OC type, commutates voltage of up to 30 V
and direct current of up to 1 A
via USB port or SMS commands
DC 9V ---24 V
10 ---30 mA (on standby),
up to 70 mA (while sending data)
Temperature from -10C to +50C,
Relative humidity up to 80 % when +20 C
900mAH
105 mm * 88 mm * 30 mm (W*D*H)
Ver 1.2
Date: 20170805