Advertisement
SDA4600 (BRIDGED #1)
SDA4600 (BRIDGED #2)
SDA4600 (BRIDGED)
CONFIGURATION 2
SUB 1
SUB 2
SDA4600 (BRIDGED)
CONFIGURATION 3
SUB 3
SUB 4
9 |
J B L S y n t h e s i s S D A 8 3 0 0 / S D A 4 6 0 0 S y s t e m G u i d e
5
Identification
SDA4600 BRIDGED 2 x 1200 Watts per channel
Configuration 2 and/or Configuration 3 is used with high power subwoofers.
Connect the Channel 1 + as speaker positive and Channel 2 + as speaker
negative.
Use with these subwoofers:
AMP CHANNEL
Configuration 2
1 + [POSITIVE]
2 + [NEGATIVE]
Configuration 2 is selected by inserting the RJ25 plug with the label
3 + [POSITIVE]
"CONFIGURATION 2" into the rear panel "GPIO".
4 + [NEGATIVE]
AMP CHANNEL
Configuration 3
1 + [POSITIVE]
Configuration 3 is selected by inserting the RJ25 plug with the label
2 + [NEGATIVE]
"CONFIGURATION 3" into the rear panel "GPIO".
3 + [POSITIVE]
4 + [NEGATIVE]
Step Five (Continued) – Configuration and
Any passive subwoofer with a power handling of 600 – 1200 Watts
S2S-EX
S1S-EX
Advertisement
