Updating The Firmware Using A Local File; Checking The Firmware Release Note - Yamaha PJP-25URs User Manual

Updating the firmware using a
local file
If the PC connecting to the PJP-25URS cannot be
connected to the Internet, follow the procedure below to
update the firmware manually using a local file.
Notes
• Once the firmware update is started, do not perform any other
operation until the update operation is completed. If the update
operation is interrupted, this unit may become unusable, in
which case you need to return this unit to the factory for repairs.
• Do not remove the USB cable during the firmware update.
Otherwise, this unit could become unusable, in which case you
need to return this unit to the factory for repairs.
1
In the "PJP-25URS Controller" screen, click
"Home".
2
Click "Firmware update".
The "PJP-25URS License agreement" screen appears.
3
Read the contents of license agreement
carefully, select "I accept the terms in the
license agreement", and then click "OK".
The "PJP-25URS Firmware update" screen appears.
4
Select "Specify a local file" and then click
"Start".
The "Open" screen appears.
5
Select the firmware file and then click
"Open".
The firmware version confirmation screen appears.
6
Check the latest firmware version and then
click "OK" to start the firmware update.
The firmware update starts.
Checking the firmware release
note
You can check the firmware release note by clicking
"Release note" in the "PJP-25URS Firmware update"
screen.
17