Connecting smart devices
The projector can project the content directly from a smart device by using a wireless dongle.
HDMI wireless dongle (e.g. BenQ QCastMirror, QCast)
• Connect the dongle to HDMI I and TYPE-A ports on the projector and switch the input signal to
HDMI-1.
Connecting InstaShow (WDC10)
• Connect the HDMI cable to the HDMI out jack of the InstaShow Host and the HDMI input jack of the
projector.
• Connect one end of the supplied USB cable to the mini USB jack of the InstaShow Host and the other
end to the USB type A jack (1.5A) of the projector.
Connection
21