Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–5 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Controls
A
B
Figure 1. Control panel.
A. ON Button: Starts blade/motor when
pressed. Can be locked-out with padlock.
B. OFF Button: Stops blade/motor when
pressed.
-4-
manual
BEFORE
Fence & Miter Gauge
C
F
Figure 2. Fence and miter gauge controls.
Figure 3. Fence mounted in alternate horizontal
position for cutting narrow workpieces.
C. Fence: Supports workpiece when making
straight cuts. Distance from blade determines
width of cut. Can be normally used in vertical
position, as shown in Figure 2, but can also
be mounted in horizontal position as shown in
Figure 3, for cutting narrow workpieces.
D. Miter Gauge Lock Knob: Secures angle
position of miter gauge.
E. Miter Gauge: Typically used for cross cuts.
Adjusts from 0°–60° left or right, and has
stops at 45°L, 90°, and 45°R.
F.
Fence Lock Handle: Secures fence position.
G. Gap Screw: Ensures table remains level
across blade slot gap and does not become
warped or bent when heavy workpieces are
loaded on table. Always keep installed and
secured except when changing blades.
Model G0555XH (Mfd. Since 1/18)
D
E
C
G
Advertisement
Table of Contents
