Host Communications - Allen-Bradley 2755-DS1A Product Data

Product Data
Bulletin 2755
Single/Dual-Head Enhanced Bar Code Decoders
26

Host Communications

Function 7 on the Select Operation menu accesses the Host Communications
menu screen You can use this screen to control host communications settings
for the HOST port. (Configuration must be saved and decoder restarted for
changes in this section to take effect.) Also defines trigger characters, buffer
size and when message will be sent to the host.
AUX Terminal Data Entry
Function 8 on the Select Operation screen accesses the AUX Terminal
Data Entry screen. With this screen you can configure the AUX terminal
for manual data entry operations. These parameters are used by the terminal
when the AUX port is set to manual data entry (not configuration) mode.