Removing The Touchpad; Prerequisites; Procedure - Dell Alienware 17 R5 Service Manual

Hide thumbs Also See for Alienware 17 R5:
Table of Contents

Advertisement

Removing the touchpad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2
Follow the procedure from step 1 to step 4 in
3
Remove the
4
Remove the
5
Remove the
6
Remove the
7
Remove the battery.

Procedure

1
Open the latch, and disconnect the touchpad cable from the system board.
2
Open the latches, and disconnect the touchpad cable and the touchpad
buttons cable from the touchpad.
3
Remove the five screws (M2x3) that secure the touchpad bracket to the
palm-rest assembly.
base
cover.
wireless
card.
solid-state
drive.
rear-I/O
cover.
computer
base.
computer. After working inside your
After working inside your
"Removing the hard
computer.
drive".
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents